Closed the side of the turntable with plastic stripes, the height is 31mm to have exactly lined out the tracks.
Segment turntable in 1:87 H0
The Pit was made from 5mm Polystyrol, the problem was at first the revolving stage was mounted or tested with any bearing and it was loosen to loosen. A Bearing was the riddles solution, the bearings inner diameter is 8mm and the outer is 22mm, for more support I glued with Epoxy a 10mm plywood peace at the other side to stabilize the whole idea.
With a stage reamer I drilled the hole and mounted the bearing, with the bearing the revolving stage is turning now very smooth and free of clearance and is prepared for the servo and ESU Switch Unit.
With a stage reamer I drilled the hole and mounted the bearing, with the bearing the revolving stage is turning now very smooth and free of clearance and is prepared for the servo and ESU Switch Unit.
The ground plate for the pit was scratched to simulate concrete plates.
Next steps are to put some styrene strips for more detailing and after I will start to airbrush the stage with a primer.
Build will continue!
How to build a segment turntable for 1:87 Locomotives!
Next Project is to build a 1:87 (00/H0) segment turntable what is full functional for two tracks.
Scratch build the bridge with tracks for the locomotives. The tracks are wired for later connection to DCC Controller from Lenze.
Scratch build the bridge with tracks for the locomotives. The tracks are wired for later connection to DCC Controller from Lenze.
Trumpeter DKM Bismarck 1:700
Hi,
attached some pictures of my DKM Bismarck from Trumpeter, it was my first ship build and it was a lot of fun compared to long term projects. The whole ship was build almost during my christmas vacation. The water effect diorama was build with foam and tissues with white glue. I try to make a small tutorial how to make this water and wave effects.
At least some rigging, bow waves with cotton and the planes are missing.
Micro LED
Micro Led´s for modelling or very tiny applications, I ordered some at
Ebay from the Seller ledbaron, they are available in different colors
and dimensions. This version is already with soldered wires.
 |
| copyright 2008 extangis GmbH |
Technische Daten / Technical data
LED Abmessungen / LED Dimensions (LxBxH / LxWxH):
1,0 mm x 0,5 mm x 0,2 mm
1,0 mm x 0,5 mm x 0,2 mm
PARAMETER
|
Bedingung / Condition
|
Typ.
|
Max.
|
Einheit / Unit
|
Vorwärtsspannung / Forward voltage
|
IF = 20mA
|
2,9
|
3,0
|
V
|
Kabellänge / Cable length
|
160
|
mm
|
||
Kabelquerschnitt / Cross sectional area
|
0,008
|
mm2
|
Undercarriage legs Bronze from Eduard
Based on the not well molded legs from the kit I took the Brassin set from Eduard, the set consists of a pair of legs and covers. Coloured with RLM 02.
Subscribe to:
Posts
(
Atom
)